Para calcular a classificação geral de estrelas e a análise percentual por estrela, não usamos uma média simples. Em vez disso, nosso sistema considera coisas como se uma avaliação é recente e se o avaliador comprou o item na Amazon. Ele também analisa avaliações para verificar a confiabilidade.
On the first use the whole tool spread while applying final torque to phasers. The area that is cut out to make a handle on the top of the tool weakened the tool severely. Also when compared to the OTC tool these are noticably thinner material. Hopefully the design will be fixed and the handle removed. UPDATE: Contacted Lisle about the issue and received an immediate response from a Lisle rep. Received a replacement product with very little hassle. Product has not been revised but very happy with the prompt action taken by Lisle customer service. UPDATE 2: Since purchasing these and having 1 damaged holder replaced I have successfully performed over 30 phaser jobs with no further issue. Here's what I have done: 1- I only loosen / tighten vct bolts with chains installed. 2- I was able to straighten the damaged holder and now use two holders per side. 3- hold constant downward pressure on the top of the holder. As long as it is flat against the head it is less likely to slip.
Tool did the job as intended with lots of supervision of tool placement because the tolerances are loose making it hard to torque down the VCT cam phasers as mine slipped out of place during my 180 degree torque down.